Arduino not generating hex files with bootloader

[ruggedvideo]

Bug Report

This is similar to the issue in #1107

Current behavior

We have a basic project in Arduino IDE using ATTiny13. For the first batch of boards, we programmed in-circuit using the Sparkfun AVR Pocket Programmer. First we burn the bootloader, then we upload the sketch.

Now, we are trying to export a hex file with bootloader, so we can have chips pre-programmed at the Microchip factory. When we use the Export compiled Binary option, we expected two hex files to be generated, one "with bootloader" and one without; however, only one hex file is created, presumably without bootloader because the filename does not include the text "bootloader".

One difference between this and the issue described in #1107 is that our sketch size is only 266 bytes. We're not sure if we are doing something wrong or if this is a bug, but after some web searching it seems like probably a bug.

Below is the debug output from the Export operation.

C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\Seth\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\Seth\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Seth\Documents\Arduino\libraries -fqbn=MicroCore:avr:attiny13:clock=9M6,BOD=2v7,lto=Os_flto -ide-version=10809 -build-path C:\Users\Seth\AppData\Local\Temp\arduino_build_167138 -warnings=none -build-cache C:\Users\Seth\AppData\Local\Temp\arduino_cache_526188 -prefs=build.warn_data_percentage=75 -verbose C:\Users\Seth\Downloads\RV-10222S_RevA\RV-10222S_RevA.ino
C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\Seth\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\Seth\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Seth\Documents\Arduino\libraries -fqbn=MicroCore:avr:attiny13:clock=9M6,BOD=2v7,lto=Os_flto -ide-version=10809 -build-path C:\Users\Seth\AppData\Local\Temp\arduino_build_167138 -warnings=none -build-cache C:\Users\Seth\AppData\Local\Temp\arduino_cache_526188 -prefs=build.warn_data_percentage=75 -verbose C:\Users\Seth\Downloads\RV-10222S_RevA\RV-10222S_RevA.ino
Using board 'attiny13' from platform in folder: C:\Users\Seth\AppData\Local\Arduino15\packages\MicroCore\hardware\avr\1.0.4
Using core 'microcore' from platform in folder: C:\Users\Seth\AppData\Local\Arduino15\packages\MicroCore\hardware\avr\1.0.4
Detecting libraries used...
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\sketch\\RV-10222S_RevA.ino.cpp" -o nul -D COMPILER_LTO
Generating function prototypes...
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\sketch\\RV-10222S_RevA.ino.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\preproc\\ctags_target_for_gcc_minus_e.cpp" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\preproc\\ctags_target_for_gcc_minus_e.cpp"
Compiling sketch...
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\sketch\\RV-10222S_RevA.ino.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\sketch\\RV-10222S_RevA.ino.cpp.o" -D COMPILER_LTO
Compiling libraries...
Compiling core...
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -x assembler-with-cpp -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\millis.S" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\millis.S.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\WInterrupts.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WInterrupts.c.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring.c.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring_digital.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_digital.c.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring_pulse.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_pulse.c.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring_analog.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_analog.c.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring_pwm.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_pwm.c.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring_shift.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_shift.c.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\Print.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\Print.cpp.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\Tone.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\Tone.cpp.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\WString.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WString.cpp.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\WMath.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WMath.cpp.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\main.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\main.cpp.o" -D COMPILER_LTO
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\Print.cpp.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\Tone.cpp.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WInterrupts.c.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WMath.cpp.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WString.cpp.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\main.cpp.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\millis.S.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring.c.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_analog.c.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_digital.c.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_pulse.c.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_pwm.c.o"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_shift.c.o"
Archiving built core (caching) in: C:\Users\Seth\AppData\Local\Temp\arduino_cache_526188\core\core_MicroCore_avr_attiny13_clock_9M6,BOD_2v7,lto_Os_flto_af9398409f542dc9ffe55672341d19a0.a
Linking everything together...
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -w -Os -Wl,--gc-sections -mmcu=attiny13a -w -flto -g -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.elf" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\sketch\\RV-10222S_RevA.ino.cpp.o" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/core\\core.a" "-LC:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138" -lm
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.elf" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.eep"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-objcopy" -O ihex -R .eeprom "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.elf" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.hex"
"C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-size" -A "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.elf"
Sketch uses 266 bytes (25%) of program storage space. Maximum is 1024 bytes.
Global variables use 9 bytes (14%) of dynamic memory, leaving 55 bytes for local variables. Maximum is 64 bytes.

Operating system

Windows

[rsora]

Hi @ruggedvideo,

Can you please paste here the complete arduino-cli command (or commands) that you are using?

Thanks for reaching out!

[ruggedvideo]

Sorry, I think I logged this in the wrong place... we are using the IDE. C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\Seth\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\Seth\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Seth\Documents\Arduino\libraries -fqbn=MicroCore:avr:attiny13:clock=9M6,BOD=2v7,lto=Os_flto -ide-version=10809 -build-path C:\Users\Seth\AppData\Local\Temp\arduino_build_167138 -warnings=none -build-cache C:\Users\Seth\AppData\Local\Temp\arduino_cache_526188 -prefs=build.warn_data_percentage=75 -verbose C:\Users\Seth\Downloads\RV-10222S_RevA\RV-10222S_RevA.ino C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\Seth\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\Seth\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\Seth\Documents\Arduino\libraries -fqbn=MicroCore:avr:attiny13:clock=9M6,BOD=2v7,lto=Os_flto -ide-version=10809 -build-path C:\Users\Seth\AppData\Local\Temp\arduino_build_167138 -warnings=none -build-cache C:\Users\Seth\AppData\Local\Temp\arduino_cache_526188 -prefs=build.warn_data_percentage=75 -verbose C:\Users\Seth\Downloads\RV-10222S_RevA\RV-10222S_RevA.ino Using board 'attiny13' from platform in folder: C:\Users\Seth\AppData\Local\Arduino15\packages\MicroCore\hardware\avr\1.0.4 Using core 'microcore' from platform in folder: C:\Users\Seth\AppData\Local\Arduino15\packages\MicroCore\hardware\avr\1.0.4 Detecting libraries used... "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\sketch\\RV-10222S_RevA.ino.cpp" -o nul -D COMPILER_LTO Generating function prototypes... "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -w -x c++ -E -CC -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\sketch\\RV-10222S_RevA.ino.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\preproc\\ctags_target_for_gcc_minus_e.cpp" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\preproc\\ctags_target_for_gcc_minus_e.cpp" Compiling sketch... "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\sketch\\RV-10222S_RevA.ino.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\sketch\\RV-10222S_RevA.ino.cpp.o" -D COMPILER_LTO Compiling libraries... Compiling core... "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -x assembler-with-cpp -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\millis.S" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\millis.S.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\WInterrupts.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WInterrupts.c.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring.c.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring_digital.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_digital.c.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring_pulse.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_pulse.c.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring_analog.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_analog.c.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring_pwm.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_pwm.c.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\wiring_shift.c" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_shift.c.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\Print.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\Print.cpp.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\Tone.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\Tone.cpp.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\WString.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WString.cpp.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\WMath.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WMath.cpp.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD -mmcu=attiny13a -DF_CPU=9600000L -DARDUINO=10809 -DARDUINO_attiny -DARDUINO_ARCH_AVR -Wextra -flto -g "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore" "-IC:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\variants\\attiny13" "C:\\Users\\Seth\\AppData\\Local\\Arduino15\\packages\\MicroCore\\hardware\\avr\\1.0.4\\cores\\microcore\\main.cpp" -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\main.cpp.o" -D COMPILER_LTO "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\Print.cpp.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\Tone.cpp.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WInterrupts.c.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WMath.cpp.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\WString.cpp.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\main.cpp.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\millis.S.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring.c.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_analog.c.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_digital.c.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_pulse.c.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_pwm.c.o" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\core.a" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\core\\wiring_shift.c.o" Archiving built core (caching) in: C:\Users\Seth\AppData\Local\Temp\arduino_cache_526188\core\core_MicroCore_avr_attiny13_clock_9M6,BOD_2v7,lto_Os_flto_af9398409f542dc9ffe55672341d19a0.a Linking everything together... "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -w -Os -Wl,--gc-sections -mmcu=attiny13a -w -flto -g -o "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.elf" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138\\sketch\\RV-10222S_RevA.ino.cpp.o" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/core\\core.a" "-LC:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138" -lm "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.elf" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.eep" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-objcopy" -O ihex -R .eeprom "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.elf" "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.hex" "C:\\Program Files (x86)\\Arduino\\hardware\\tools\\avr/bin/avr-size" -A "C:\\Users\\Seth\\AppData\\Local\\Temp\\arduino_build_167138/RV-10222S_RevA.ino.elf" Sketch uses 266 bytes (25%) of program storage space. Maximum is 1024 bytes. Global variables use 9 bytes (14%) of dynamic memory, leaving 55 bytes for local variables. Maximum is 64 bytes.

[per1234]

Due to the limited memory of the ATtiny13, MicroCore does not use a bootloader. The reason you still might do a Tools > Burn Bootloader when using MicroCore is because it sets the configuration fuses on the ATtiny13 according to the custom Tools menu selections (BOD, EEPROM, Clock). You can see here that the bootloader command doesn't actually flash anything to the chip:
https://github.com/MCUdude/MicroCore/blob/master/avr/platform.txt#L142

So don't worry about the lack of the *_bootloader.hex file. Just provide the manufacturer with the normal .hex file and make sure to tell them which fuse settings you require.

[ruggedvideo]

Thanks!