WifiNina cannot cope with Business wifi environment

[Russell108]

Ability to connect to a specific Access point where many access points share the same SSID
Currently, in Business hotel environment where the same SSID password is used across a set of access points

The Arduino MKR1010 and the Arduino IOT 33 do not connect to a sensible access point instead connect to one with a real signal.

Ideally, there would be. A function in the library to select the best access point by signal strength for a given SSID

[per1234]

Hi @Russell108. Thanks for taking the time to submit an issue.

I see we have another report about this at #200.

It is best to have only a single issue per subject so we can consolidate all relevant discussion to one place, so I'll go ahead and close this in favor of the other.

If you end up with additional information to share, feel free to comment in the other thread.

[Russell108]

Is this issue going to be resolved

…

On 24 Nov 2022, at 10:26, per1234 ***@***.***> wrote: Hi @Russell108 <https://github.com/Russell108>. Thanks for taking the time to submit an issue. I see we have another report about this at #200 <#200>. It is best to have only a single issue per subject so we can consolidate all relevant discussion to one place, so I'll go ahead and close this in favor of the other. If you end up with additional information to share, feel free to comment in the other thread. — Reply to this email directly, view it on GitHub <#232 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAEYL34NC22ROVXDAZVIOFDWJ47DTANCNFSM6AAAAAASKFDXJA>. You are receiving this because you were mentioned.